Indian Pattern Armored Car (IPAC)

Moderators: Vis Bellica, Laffe

Post Reply
User avatar
redmist1122
Posts: 740
Joined: Sat Mar 21, 2015 1:58 am
Location: Arizona, USA

Indian Pattern Armored Car (IPAC)

Post by redmist1122 »

Well, I found a very good 3D file to print out some of these for North Africa and maybe Malaysia use by the Commonwealth.

My question to the forum is what would the Consolidated Arsenal categorized the IPAC up as? I'm not good with the CoCulator.

Thanks.
Greg P.
Tucson, AZ, USA
User avatar
Truscott Trotter
Posts: 8788
Joined: Mon Sep 09, 2013 11:11 pm
Location: Tasmania the Southernmost CoC in the world

Re: Indian Pattern Armored Car (IPAC)

Post by Truscott Trotter »

I make it 10 pts so support level 4?
e.g Armour 14mm lvl 3
AP = 0 (unless w boys)
HE level 4 for LMG
Fast +2
Small +1
Low Profile +1
Opentopped -1
Note this is from the Coculator which is not how the CA is calculated I am not privy to that but the armour values are a way off on the CA
User avatar
redmist1122
Posts: 740
Joined: Sat Mar 21, 2015 1:58 am
Location: Arizona, USA

Re: Indian Pattern Armored Car (IPAC)

Post by redmist1122 »

Cool! I was thinking on the same lines of what you came up with, as it closely matches other Brit armored cars; dingo/linx cars.

Thank you.
Greg P.
Tucson, AZ, USA
User avatar
Emilio
Posts: 655
Joined: Tue Sep 03, 2013 8:43 pm
Location: Cee, Galicia, Northwest Spain
Contact:

Re: Indian Pattern Armored Car (IPAC)

Post by Emilio »

I don't think it has a low profile.
User avatar
Truscott Trotter
Posts: 8788
Joined: Mon Sep 09, 2013 11:11 pm
Location: Tasmania the Southernmost CoC in the world

Re: Indian Pattern Armored Car (IPAC)

Post by Truscott Trotter »

Didn't check the height to be fair, just assumed based on Dingo.
User avatar
redmist1122
Posts: 740
Joined: Sat Mar 21, 2015 1:58 am
Location: Arizona, USA

Re: Indian Pattern Armored Car (IPAC)

Post by redmist1122 »

The Dingo dimensions (L-W-H) were: 3.18x1.71x1.50 m (10.43x5.61x4.92 ft)

The IPAC dimensions (L-W-H) were: 4.72 x 2.26 x 1.98 m (15.6 x 7.5 x 6.6 ft)
Greg P.
Tucson, AZ, USA
Post Reply