Page 1 of 1

15mm measurement

Posted: Wed Sep 26, 2018 1:24 pm
by Pvt weezle
Been playing WAT in 28mm. Now I want to try 15mm (have lots of early war stuff in that scale). I'm wondering what measurements people are using. Specifically, are you keeping same measurement as 28mm or maybe adjusting too: one inch converted to 2cm...?

Re: 15mm measurement

Posted: Wed Sep 26, 2018 1:27 pm
by Derek H
Just keep it as it is. Works fine.

Re: 15mm measurement

Posted: Wed Sep 26, 2018 1:37 pm
by Greg Bradfield
Agreed leave as is.

Re: 15mm measurement

Posted: Wed Sep 26, 2018 8:28 pm
by Archdukek
Works very well using the distance and ranges as given. No need to change anything.

John

Re: 15mm measurement

Posted: Fri Sep 28, 2018 2:03 pm
by Pvt weezle
Will do gentlemen.....thanks for your quick reply. Looking forward to better maneuver opportunities. Love the look of 28mm but don't have room for large table. Playing 15mm on 6x4 table.....
Yers in iron and curr fayced dogges,
Pvt Weezy

Re: 15mm measurement

Posted: Tue Jan 21, 2020 4:55 am
by Cassill
I am going from 28mm to 15mm as I have a 4 x 4 play area. Do you recommend that I still do not chance the distances?

Re: 15mm measurement

Posted: Tue Jan 21, 2020 7:06 pm
by Herkybird
We always have used 1/72, it works well with the rules as is. 15mm will work as well, I am sure! :)

Re: 15mm measurement

Posted: Tue Jan 21, 2020 10:10 pm
by Cassill
Thanks for the reply - I was just concerned as I have 28mm tanks which I hear were too big for a 4ft x 4ft area. So when I saw that you all play 15mm with no change to the measurement distances I was concerned that 4ft x 4ft still would not be big enough for 2-4 tanks.

Re: 15mm measurement

Posted: Wed Jan 22, 2020 12:48 am
by siggian
The answer is that the terrain will dictate whether the 4x4 is too small. With plenty of LOS blocking terrain, it should be plenty big enough.